Wharfedale Pro BX1360SD Instruction Manual

BX SERIES MIXER INSTRUCTION MANUAL:BX1060SDBX1360SDBX1780SD

33. Monitor Output: This jack is used to connect to an external monitor amplifier and speakers from theinternal monitor bus, just after the MONITOR MA

BX1360SD/1780SD FEATURESPage 7Key to BX1360/1780SD Features:1. Low Z input with phantom power(balanced)2. Hi Z input for high output source(balanced)3

12. Power on LED13. EFX TO MAIN14. EFX to MONITOR15. Effect preset select16. EFX MASTER send17. EFX BYPASS18. Monitor/Left Equalizer19. Main/Right Equ

33. Power on /off Switch34. Fuse35. A/C power Inlet36. Cooling FAN37. Speaker outputPage 9

General Operating Instructions:1. Ensure the Power Switch is set to “OFF” before connecting setup.2. Select either ‘Stereo Mix’ or ‘Main Monitor’ by p

and harmony vocal channels. 16. Make sure you increase the input channel volume level on this input to what will be during normaluse.17. Use the MAIN/

CLUB MONO PA SYSTEM SETUPPAGE 12

CLUB STEREO PA SYSTEM SETUPPAGE 13

CLUB STEREO PA SYSTEM WITH SUBWOOFERPAGE 14

CLUB STEREO PA SYSTEM WITH POWERED MONITOR SPEAKERSPAGE 15

General specifications: Maximum output power: BX1060/1360SD: 300W/4Ω 200W/8Ω @0.4% THD at 1KHzBX1780SD: 400W/4Ω 300W/8Ω @0.4% THD at 1KHzFrequency re

INPUT SPECIFICATIONS:Input Connector Input LevelType Gain/Trim Actual load Nominal level Max Before ClippingMono Channel(MIC) XLR max 3KΩ -58dB(1mv) -

WHARFEDALE PROFESSIONALIAG HOUSE, SOVEREIGN COURT, ERMINE BUSINESS PARKHUNTINGDON, PE29 6XU, UNITED KINGDOMEmail: [email protected]

Wharfedale Professional Limited Warranty: The BX Series of Powered Mixers are warranted to be clear ofmanufacturing or materials defects for a period

CONTENTS:Page 1 IntroductionPage 2 BX1060SD Features and ControlsPage 7 BX1360SD/1780SD FeaturesPage 10 General Operating InstructionsPage 12 Club Mon

Introduction:Thank you for choosing a BX Series Powered Mixer from Wharfedale Professional. Please read theseinstructions carefully to ensure problem

BX1060SD FEATURES AND CONTROLS:1. Low Z input with phantom power (balanced):The microphone inputs are electronically balanced for maximum noise suppr

8. Tone control:The LOW, MID and HIGH EQ controls independently adjust the bass, middle and treble frequencies foreach channel. The LOW EQ control all

17. Main /Left Equalizer:The graphic equalizer is used toshape the overall frequency responsefor the main output signal by upto+12dB. It affects the M

27. Effect Send/Effect Return: The effects send jack is a 1/4” connector that produces an unbalancedline-level signal. This signal is fed from the int